Buy Sell Biz Offer of
June 2006
Plastics Marketplace / Portal For Manufacturers
Exporters Importers Wholesalers Suppliers Buyers
Polymer / Plastic Directory Covers
Manufacturer Exporter Importer Wholesaler Supplier Buyer Seller
Buy Offer
>
Reprocessed Material >
June 1 2006
Recycle Plastic Pellets Paid
We require recycle PP/HDPE pellets in differnt grade on regular
basis.
Country: India
Buy Offer >
Plastic Rubber Products >
June 1 2006
PVC Boots Safety And Non Safety
Paid
We need to purchase PVC safety and non-safety boots in three
heights, calf, mid- calf and below calf. Quantity:- full
container loads.
Country: Trinidad and Tobago
Sell Offer >
Plastic Rubber Products >
June 1 2006
PET Preforms
Kings Chemicals Limited
We will be soon starting PET preform Plant in Malaysia with a
very highly sophisticated Hi speed HUSKY machine. We will be
exporting 90% of preforms outside Malaysia. Please contact us
for your requirements of preforms.
City: Lusaka State: Lusaka Country: Zambia
Send Mail
Sell Offer >
Plastic Rubber Products >
June 1 2006
PET Preforms
Asha Packaging
We are manufacturers of Pet Preforms suitable for Mineral Water
Bottles, Carbonated Soft Drinks and other non alcholic Drinks.
We are making Pet Preforms on world class Injection Moulding
Machines and Multi Cavity Precision Moulds to give uniform wall
thickness, which results in practically zero rejection during
blowing and greater strength.
City: Nagpur State: Maharashtra Country:
India
Send Mail
Buy Offer >
Raw Material >
June 1 2006
POY Yarn Paid
We need raw POY yarn 150D/48F
Country: Iran
Buy Offer >
Machine >
June 1 2006
Blood Bags Manufactring Machine
Paid
We want to start blood bags manufacturing factory. Please quote
best price for machine.
Country: India
Buy Offer >
Used Machine >
June 1 2006
Used Round Plastic Straws Printing Machinery
Paid
We seek used 4-6mm round plastic straws printing machinery.
Perhaps the parmaceutical capsule printing machinery would serve
printing on the drinking straws as well.
Country: Pakistan
Sell Offer >
June 1 2006
Automatic Washing Line For Plastic Scrap
Samki Teck Resources
We supply fully automatic washing line for LDPE.HDPE,PP rigid
waste and film scrap. We offer an integrated plant from 200
kg/hr till 1000 kg/hr.
City: Hyderabad State: Andhra Pradesh Country:
India
Send Mail
Sell Offer >
Machine >
June 1 2006
PET Bottles / Film Recycling Line
Samki Teck Resources
We offer a complete Solution in recycling PET,PP,PC,Nylon etc
with best Technologies from Europe and India. Indian made fully
automatic washing line from 200 kg/hr till 1000 kg/hr Indian
made SSP system to reduce overall project cost.
City: Hyderabad State: Andhra Pradesh Country:
India
Send Mail
Sell Offer >
Plastic Rubber Products >
June 1 2006
PE Cling Fillm
Zibo Luning Packaging
Produce Co., Ltd
We offer PE cling film. 1.Material:LDPE 2.Suitable for food
packaging 3.It is helpful to protect food fresh. Normal
Size:Width:30cm 45cm Length:30m, 45m, 60m, 300m, 1500m.
City: Zibo State: Shandong Country: China
Send Mail
Buy Offer >
Plastic Rubber Products >
June 1 2006
PE Tarpaulin Paid
We need PE tarpaulin, woven fabric (both side coated with PE),
width : 72inch, length : 90/100 mtr per roll, weight : 170gr/m -
300gr/m, colour : orange/blue.
Country: Bangladesh
Sell Offer >
Moulds Dies >
June 1 2006
Injection Moulds
K-Tech-Italia
We offer injection, double injection, compression, pressure die
casting moulds.
City: Corte Franca Brescia State: Italy
Country: Italy
Send Mail
Sell Offer >
Machine >
June 1 2006
Foil Stamping Die Cutting Machine
Xiamen Xianghan Co., Ltd
This machine is a special equipment for creasing and cutting
ordinary cardboard, corrugated board, plastic and leather in
general, it is applicable for printing packaging decoration and
plastic industries. The machine is characterized by its compact
structure, fine workmanship, high precision and easy and
reliable.
City: Xiamen State: Fujian Country: China
Send Mail
Buy Offer >
Moulds Dies >
June 1 2006
Roto Moulded Toys Dies Paid
We required dies makers who can make stainless steel sheet / al
cast dies for rotational moulded toys.
Country: India
Buy Offer >
Reprocessed Material >
June 1 2006
Re-Process Granules Of PP Woven Bags
Paid
We have Export requirements of Re-Process Graules of PP Woven
Sacks (Next to Virgin Quality) Raffia Grade. Products:
Re-Process Graules of PP Woven Sacks (Next to Virgin Quality)
Grade : Raffia Grade. Application: PP Woven Sacks. Quantity :
150 MTS / Month. Price : In USD / FOB Indian Port. Please quote
your best offer with eariest time of shipment and send us your
re-process granules sample of 2 kgs to our postal address for
our quality reference.
Country: India
Sell Offer >
Additive Filler Chemical >
June 1 2006
Masterbatch
Changzhou Xinfuyun
Masterbatch Co. Ltd
Hongtai Brand masterbatch mainly includes special purpose type
used in PE,PP, ABS, PSAPAAPET and be suitable for plastic
injection, filature, extrusion, puff film and sparkle etc.
Process and there are optical effected type like pearl,
fluorescent & luminous, as well as functionality type like
weather fastness, anti-static, anti-fire and stuffing
City: Changzhou State: Jiangsu Country:
China
Send Mail
Buy Offer >
Used Machine >
June 1 2006
Used Plastic Injection Machine
Paid
We looking for used plastic injection molding machine 5000 ton
clamping force and capaity 60-70 kg.
Country: Viet Nam
Buy Offer >
Raw Material >
Reprocessed Material >
Machine >
June 1 2006
Thermoforming Machines Lid Printers
Paid
We want HIPS recycled or virgin raw material illig rdm 37/10,
thermoforming machines, injection moulding machines below
150ton, lid printer for disposable cups.
Country: Sri Lanka
Sell Offer >
Machine >
June 1 2006
XPS Foam Board Extrusion Line
Jinsung Machinery Co.
Ltd
We offer PE foam sheet extrusion line PS foam sheet extrusion
line Automatic vacuum forming line PP strap extrusion line
XPE(cross-linked) foam sheet line. Excellent compatibility with
building materials like cement, gypsum, lime and sand and superb
adherence on concrete and mortar coatings via treatment of
skinning and grooving boards
City: Gyeongsangbuk-Do State: Korea Country:
South Korea (Republic Of Korea)
Send Mail
Sell Offer >
Plastic Rubber Products >
June 1 2006
Overstocked Caterpillar Haul-Off For Pipes
Battenfeld Extrusion
Systems Ltd.
We offer two caterpillar hauloff for pipe diameter 25-160mm;
Battenfeld design, made in China. Highly wear-resistant v-shaped
pads; contact length 1200mm; haul-off force 9000n; speed range
0.2-10m/min.
City: Foshan State: Guangdong Country:
China
Send Mail
Sell Offer >
Moulds Dies >
June 1 2006
UPVC Pipe Fitting Mould
Huida (Shenyang) Plastic
Mould Co., Ltd.
Huida has experience in design and making many kinds of UPVC
fitting moulds for more than 16 years. We specialize in design
and produce plastic supply water pipe fitting mould, and
drainage pipe fitting mould, plastic elbow mould, tee mould etc.
to ensure our better mold quality,better deliver time and
competitive price. also we provide after sales service.
City: Shenyang State: Liaoning Country:
China
Send Mail
Sell Offer >
Raw Material >
June 1 2006
PVC Resin (Suspension)
Sinochem Shanghai
We are exporter of PVC resin, K-value 58,67,71 for different
application.
City: Shanghai State: Shanghai Country:
China
Send Mail
Sell Offer >
Machine >
Used Machine >
June 1 2006
Van Dam 560 Gos Com 6 Colour Cup Printer
Global Offset Services
BV
We offer High speed round cupprinter; fully remanufactured, new
electrics, PLC, pneumatics, UV curing (Curing On Mandrel). 6
colour cup printer, up to 450ppm, with full warranty. Delivery:
3 months after order.
City: Barneveld State: Gelderland Country:
Netherlands
Send Mail
Sell Offer >
Scrap Waste >
June 1 2006
PP Diaper Scrap LDPE Film Scraps
Boucom International BV
WE OFFER PP DIAPER SCRAP WASHED AND DRIED MAX 10% CELLULOSE MAX
15% MOISTURE PACKED IN BALES 25MT PER 40'HC CONTAINER EURO
200/MT CFR HONG KONG & LDPE FILM SCRAPS-BRUSHED CLEAN ONE SIDE
WHITE/ONE SIDE BLACK 120 MICRON THICK 5% STONE DUST PACKED IN
BALES - 25MT/40'CONTAINER EURO 250/MT CFR HONG KONG.
City: Hurdegaryp State: Netherlands Country:
Netherlands
Send Mail
Sell Offer >
Scrap Waste >
June 1 2006
HDPE Netting Waste (Unwashed)
Boucom International BV
We offer HDPE netting waste (unwashed) 100% HDPE, natural
colour, contamination 50% (including moisture) on rolls, 25mt
per 40'HC container Euro 180/mt CFR Hong Kong
City: Hurdegaryp State: Netherlands Country:
Netherlands
Send Mail
Sell Offer >
Used Machine >
June 1 2006
Used Polytype BDM 350 Cup Printer
Global Offset Services
BV
We offer Cup printing machine for round cups,6 colours, UV
Curing On Mandrel, infeed elevator, outfeed with belt-take off,
length counting restacker, buffer elevator. 1989.
City: Barneveld State: Gelderland Country:
Netherlands
Send Mail
Sell Offer >
Packaging Materials >
June 1 2006
Shrink PVC Film
Ervisa
We offer shrink PVC film very easy to handle. PVC film
bioriented extrusion in double bubble. Thickness from 15 my up
to 50 my, shrinkage from 5% up to 60%, good tear resistance and
excellent machinability. Suitable to be in touch with food. This
product can be manufactured with anti-fog qualities.
City: La Puebla De Alfinden State: Zaragoza
Country: Spain
Send Mail
Buy Offer >
Packaging Materials >
June 1 2006
Rigid PVC Film For Blister Packing
Paid
We need to purchase a container of 26.5' x .05mil rigid PVC film
for blister packing manufacturing.
Country: United States
Sell Offer >
Raw Material >
Additive Filler Chemical >
June 1 2006
PET, PE, PP PS, PC Recycled Virgin Pellets
GDV S.A.
We offer recycled and virgin plastic pellets. Includes PET, PE,
PP, PP film, PS, PC. Our products include: PET (ground (GR) and
clean), PE (High Dens or Low Dens, GR and clean), Composites
(PEHD and PELD and PP), PP (Injection and Blown), PP Film, PS,
and PC
City: Asuncion State: Asuncion Country:
Paraguay
Send Mail
Buy Offer >
Packaging Materials >
June 1 2006
HDPE Polybags Paid
We supply New Zealand Kiwifruit industry with Polybag and
Polyliner. We are looking for new supplier outside of China.
Polybag HDPE Clear Blocked Bag. 410mm width + 360mm Gusset
(180mm each side) x 540mm length + 30mm blocked x 18 micron. 50
peices per block. approx 1.5 - 5 million bags per annum.We are
after high quality product, with very good price. We would
expect supplier to already be conducting business with USA and
Japan markets.Suppliers we are most interested in purchasing
from are Vietnam and India.
Country: New Zealand
Sell Offer >
Raw Material >
Plastic Rubber Products >
June 1 2006
PET Preform Polyester Chip
Beijing Sino New
Material Co.,
We are the main supplier of PET preform and Polyester chip
supplier in China. Bottle-grade Polyester chip is applicable to
packing bottles fo drinking water such as pure water, natural
mineral water and distilled water etc.
City: Beijng State: Beijing Country: China
Send Mail
Sell Offer >
Machine >
June 1 2006
Plastic Processing Machine
E Quest Technologies Pvt
Ltd
We are manufacture & exporter of plastic processing lines such
as Drinking Straw M/c(Single & Multicolour), Blown Film Plant
Sheet M/c, Pipe And Profile Plant, Box Strapping Line, Wire &
Profile Plant, Compounding Machine, Casing Caping Plant, Blow
Moulding M/c (With Deflashing Unit), Stretch Blow Molding M/c
(PET), Injection Moulding M/c, PP Mat Loom, Add Ons :- Grinder /
Shredder /Chrusher, Agglomerator / Aglomixer, Sealing & Cutting
Machine, Pipe Socketing Machine
City: Mumbai State: Maharashtra Country:
India
Send Mail
Buy Offer >
Used Machine >
June 5 2006
Used Flexo Printing Machine Paid
We are in need for used flexo printing machine 2 or 3 color to
use it for printing on aluminum foil ( thickness about 20
micron). It is prefered if it have a slitting device.
Country: Jordan
Sell Offer >
Plastic Rubber Products >
June 5 2006
Spray Painting For Plastic Parts
OEM Sourcing & Product
Development Ent
We are a Singapore local manufacture company(ISO 9001:2000)
which offers plastic injection molding,sub-contract & secondary
process of high quality such as spray painting & silkscreen
process.
City: Singapore State: Singapore Country:
Singapore
Send Mail
Buy Offer >
Packaging Materials >
June 5 2006
LDPE Stretch Film Paid
We are in urgent need of LDPE Stretch Film, Monthly requirement
will be above 1000 kg. Kindly quote your best rate, micron &
other terms n conditions immediately to enable us to order
immediately
Country: India
Sell Offer >
Plastic Rubber Products >
June 5 2006
Plastic Chatai
Bradbury Exports
We are manufacturers of Polypropylene / PP mats(chatais) in
jacquard and dobbies designs. We want to export the same
City: Mumbai State: Maharashtra Country:
India
Send Mail
Sell Offer >
Additive Filler Chemical >
June 5 2006
Calcuim Carbonate Masterbatch
KE Surname Business
Enterprise
It apply for:( injection-moulding, extrution,
film-blowing,injection-blowing and grain-drowing) Mix filler
with the stuff resin from the ratio of 5% to more than 45% this
technology is significant to reduce material cost.
City: Dongguan City State: Humen Country:
China
Send Mail
Sell Offer >
Machine >
June 5 2006
Plastic Thermalforming Extruding Machine
Kica Machinery Factory
Co. Ltd.
We are a professional manufacture of plastic machines and
packaging machines since 1989.We offer high quantity products
such as plastic extruding machine to make PP, HDPE,LDPE and PS
sheets, plastic thermalforming machine which can mold
PP,PS,PE,PVC sheet into various packages or food containers.
City: Shantou State: Guangdong Country:
China
Send Mail
Sell Offer >
Scrap Waste >
June 5 2006
Used PP Bigbags
IVO Besselsen Trade
We can offer PP used bigbags, pressed in bales. No hazardous
content. 23mt in 40ft container. Price C&F China mainport US$
410.
City: Putten State: Gelderland Country:
Netherlands
Send Mail
Sell Offer >
Machine >
June 5 2006
Plastic Crusher
Zhejiang Yingpeng
Machine Co. Ltd.
We specilized in manufacturing plastic & rubber crushers
including large-scale hollow crushers, pipes and heteromorphy
crushers, small and medium material crushers, general-purpose
crushers, four-axised shredders, coke bottles crusher and clean
recycling production lines, waste plastics (film) recycling
systems , color mixers, conveyors and more.
City: Taizhou State: Zhejiang Country:
China
Send Mail
Sell Offer >
Machine >
June 5 2006
Plastic Pipes PVC Profiles Plant
Forte Makina Ltd.
We produce and export extrusion lines for manufacturing plastic
PVC panels, profiles, and also for plastic pipes from PP, PE,
PVC of various diameter and application. We provide support of
our equipment, installation and training of the personnel.
Assembly and starting-up and adjustment works, and also training
on use of a line during 10 days are included into price of the
plant.
City: Istanbul State: Istanbul Country:
Turkey
Send Mail
Buy Offer >
Machine >
June 5 2006
PP Strapping Band Machines PP Straps
Paid
We are actually importing semi-automatic strapping machines and
also PP straps. We buy 10 kgs. rolls of white color straps from
6 to 15 mm. width and from 0.55 to 0.9 mm thickness in A, B and
C qualities. We sell only to wholesalers. Please inform
specification of strap you are able to supply indicating you
BEST F.O.B. -indicate port- prices
Country: Argentina
Buy Offer >
Machine >
June 5 2006
Blow Moulding Machine Paid
We want a blow moulding machine for PVC containers. Bottles up
to 5 liters containers. Please advise possibile capacities.
Country: Israel
Biz Offer >
Machine >
June 5 2006
Looking For Representative Ouside India
Exzakta Meccanica
We are manufacturer of PP woven bag making machinery in India.
We are looking for representative for PP woven bag making
machinery outside India
City: Ankleshwar State: Gujarat Country:
India
Send Mail
Buy Offer >
Packaging Materials >
June 5 2006
Stretch Film Adhesive Tapes Masking Tape
Paid
We want 40 feet container of masking tape, 40 feet container of
adhesive tape and 40 feet container of stretch film. It should
be made in an arab country.
Country: Egypt
Buy Offer >
Plastic Rubber Products >
June 5 2006
38 Mm Preform Paid
We are looking for 38 mm PET preform in wt. range of 55 to 65
grams. Our annual requirement is 20 million pcs.
Country: Saudi Arabia
Buy Offer >
Raw Material >
June 5 2006
Reprocessed PP Raffia Material
Himar Fabrics & Pkg Pvt
Ltd
We require 1st / 2nd / 3rd reprocessed PP raffia material. We
require approximately 100 mts per month of PP raffia reprocessed
in natural / colored. Please indicate your lowest pricing.
Payment - immediate.
City: Mumbai State: Maharashtra Country:
India
Send Mail
Buy Offer >
Plastic Rubber Products >
June 6 2006
EPS Foam Cups Paid
We would like to request for a quotation for the following
specifications: 6 oz Foam Cups (EPS)180 ml - Plain White 1 x 40'
Container Load CIF Dubai Port Please send product samples to our
mailing address for refernce purposes.
Country: United Arab Emirates
Buy Offer >
Used Machine >
June 8 2006
Reconditioned BOPP Lamination Plant
Paid
We want reconditioned BOPP film lamination plant which can
process one meter width BOPP films.
Country: India
Sell Offer >
Plastic Rubber Products >
June 8 2006
PVC Leather PVC Tarpaulin PVC Sheet
Fulin Plastic Industry
Co.
We offer PVC Leather,PVC Tarpaulin,PVC Flexible Sheet,PVC Colour
Sheet,PVC Matte Sheet,PVC Transparent Sheet,PVC Clear Sheet,PVC
Printing Sheets.
City: Bienhoa City State: Vietnam Country:
Viet Nam
Send Mail
Sell Offer >
Machine >
June 8 2006
Blow Moulding Machine PET Strecth Blow Machinery
Sinco Technology Co.,
Ltd
Our products are plastic blow moulding machines and PET strecth
blow machine. We provide our products to worldwide which also
provides all products as durable and reasonble price machines.
if you need more information, you visit to our website which it
still underconstruction but it sill have some information to
provide you, or you can send mail or fax to me for askig for
more information.
City: Bangsue State: Bangkok Country:
Thailand
Send Mail
Buy Offer >
Machine >
June 8 2006
Preform Cap Production Machinery
Paid
We require Preform production machinery, Cap production machine
for PET and BOPP. We are establishing a new factory in Iran need
above mentioned machinery for minimum of 6000 preform per hour.
Manufacturer must be from France or Germany or Canada. Please
attach specification plus price.
Country: Iran
Sell Offer >
Used Machine >
June 8 2006
Japanese Brand Used Injection Molding Machines
Tsutawa Co., Ltd.
We'd like to sell NISSEI, JSW, KAWAGUCHI, HISHIYA, and MEIKI
brand used injection molding machines. NISSEI" PS40E5ASE (1983),
PS40E6ASE (1990), PS60E12ASE (1991), FS80S18ANE (1990),
FE120S25ASE (1993) "JSW" J50E-C3 (1989), J220E-C3 (1989)
"KAWAGUCHI" K125-I (1984), K180B (1987), K265-C (1988),
"TOSHIBA" IS150E-5A (1986), "HISHIYA" VP-130PC (1986), VP-100NPC
(1990), VP-100NPC (1994), "MEIKI" M-100A2-DM (1990)
City: Osaka State: Japan Country: Japan
Send Mail
Buy Offer >
Packaging Materials >
June 8 2006
BOPP Adhesive Jumbo Roll Paid
We want BOPP adhesive jumbo roll. Clear and Brown Jumbo 1)
Thickness: 43, 45 Micron 2) Length : 4000 m/roll 3) Width : 1280
mm 4) Quantity : 5 - 10 Rolls trial order, 60 rolls later 5)
Quote condition : CIF Haiphong Port, Vietnam 6) Payment : L/C at
basic
Country: Viet Nam
Sell Offer >
Used Machine >
June 8 2006
Used Van Dam 460 Lid Printer
Global Offset Services
BV
We offer used Van Dam model 460 lid printing machine, 5 colours
(optional 6), ir curing, restacker. It is in excellent shape;
can be inspected in our works. several variable parts can be
delivered on customers product-made.
City: Barneveld State: Gelderland Country:
Netherlands
Send Mail
Sell Offer >
Machine >
June 8 2006
Plastic Recycling Machine
Yongshun Plastic
Machinery Co., Ltd
We offer plastic recycling machinery. The machine is used to
sieve, grind, clean and prill the waste and Polyethylene,
Polypropylene and other 2mm thick thermoplastics. It is high
quality machine
City: Zhangjiagang State: Jiangsu Country:
China
Send Mail
Sell Offer >
Plastic Rubber Products >
June 8 2006
Polycarbonate Drinkware
Chan Tech Machinery
Supply
We offer 10,000 pcs of Polycarbonate / PC drinkware for sell for
wine glass,bowls,cutlery set,etc. It is light weight,look good
and will not chip, split,break or craze,dishwasher safe ,
microwave transparent,stain resistant and impervious to oduors.
suitable to use in pool&spa areas,beach resorts,outdoor
restaurant,night clubs,snow and ski areas,hospitals,care
homes,prisons,canteens,cafetarias,hotels,motels,airlines,family
restaurant.
City: Serdang State: Selangor Country:
Malaysia
Send Mail
Sell Offer >
Plastic Rubber Products >
June 8 2006
PVC Profile Door And Window
Shandong Dynamic Plastic
Profile Co
We can provide PVC doors and windows-mainly single slider,double
slider, casement, tilt at turn, single hung and awning. So far
we have exported to many countries, such as USA. Canada, Mexico,
etc
City: Dongying State: Shandong Country:
China
Send Mail
Sell Offer >
Plastic Rubber Products >
June 8 2006
PP HDPE Sheet
Commercial Extruded
Prod.
We manufacture up .100 mill to .500 mill (half inch) thick
plastic sheet from PP / Polypropylene or HDPE for forming or
seperators.
City: Ocala State: Florida Country: United
States
Send Mail
Sell Offer >
Plastic Rubber Products >
June 8 2006
HDPE Pipes
Lakshmi Plastics Pvt Ltd
We are the manufacturers of HDPE pipes.
City: Hyderabad State: Andhra Pradesh Country:
India
Send Mail
Buy Offer >
Used Machine >
June 8 2006
Used PVC Pipe Line 32-110 Mm Paid
We want used PVC pipe line machine. Pipe size should be 32-110
mm.
Country: Romania
Buy Offer >
Plastic Rubber Products >
June 8 2006
Thermocole Glassess Paid
We want 150 ml or 6 oz glassess for immediate delivery apprx
qty: 100 cartons each containing 1000 glassess. Please send
quotations giving detailed specifications of the products
Country: India
Sell Offer >
Plastic Rubber Products >
June 8 2006
PET Bottles PET Preforms
Eaglefood
We are largest manufacturer of PET bottles & PET preforms in
Pakistan. We want to create friendly business atmosphere. We
manufacture PET bottles 300ml upto 19 ltr.
City: Lahore State: Punjab Country:
Pakistan
Send Mail
Buy Offer >
Packaging Materials >
June 8 2006
PVC Zippered Bag With Cotton (PP) Rope Handles
Paid
We are looking for 3,000 to 5,000 PVC zippered bag with cotton
(PP)rope handles on top. Material: 0.1mm thickness clear PVC
Binding material:0.07mm white or clear PVC #3 polyester zipper
Packing:10 pcs wrapped in craft paper and 150 pcs in a carton.
16 x 16 x 7 16 x 14 x 7 16x 13x 6
Country: United States
Buy Offer >
Scrap Waste >
June 8 2006
PET Bottle Scrap Paid
We are processors of PET flakes. We regularly require plant
waste or post consumer PET bottles, PET bottles scrap. The
material should be clear free from any contamination.
Country: India
Sell Offer >
Plastic Rubber Products >
June 8 2006
Electrical Cannula PPR Pipes PVC Fence
Zhejiang Guorou Suye Co.
Ltd
We manufacture wide variety of PVC fencing products lines ,both
North American styles and Asian styles , using state-of-the-art
technology, produces virtually maintenance-free vinyl fence
systems that are composed of a specially formulated blend of
premium quality polyvinyl chloride (PVC) and ingredients. High
percentage of Ultraviolet inhibitors are used to prevent
discoloration and aging
City: Linhai State: Zhejiang Country: China
Send Mail
Sell Offer >
Plastic Rubber Products >
June 9 2006
Thermoformed Disposable Products
Irwin India Pvt Ltd
Our unit is 100 % EOU. We are producing thermoformed disposable
products we also producing ready to searve trays in barrier
sheet
City: Nashik State: M.s. Country: India
Send Mail
Buy Offer >
Plastic Rubber Products >
June 9 2006
5 Gallons PET Jar Paid
We are indenting firm. one of customer has intend to buy 5
gallons PET jar in one 20 feet container. Please quote your
special price based on CNF Chittagong by sea.
Country: Bangladesh
Sell Offer >
Packaging Materials >
June 9 2006
PP Woven Sacks
Uni Plast
We are the newest factory in Egypt to make PP Woven Sacks. We
offer PP Woven Sack in capacity from 25kgs to 50kgs, color any
color or pattern upon request, denier from 540 to 2000, weave /
mesh 40*40 to 45 * 45 tapes per dm. any combination top / mouth
: heat cut. Printing one side or two sides, up to 4 colors.
City: Badder State: Cairo Country: Egypt
Send Mail
Buy Offer >
Moulds Dies >
June 9 2006
PET Preform Mold Paid
We are iranian producers of plastic containers in Tehran and our
inquiry for supply of PET mold with following specification :
one set preform mold with 6 cavities or two sets preform molds
with 4 cavities the mold is used for production of 56 gram with
internal cap diameter 33mm pet with an annual capacity of
10'000'000 pieces. Please make your catalogue, technical
brochure and price list for our study.
Country: Iran
Buy Offer >
Machine >
June 9 2006
PET Waste Crushing Washing Drying Packaging Line
Paid
We are interested to purchase PET waste crushing, washing,
drying line machine. Capacity 120kg per hr. Please quote best
price for machinery.
Country: Yemen
Buy Offer >
Machine >
June 9 2006
PVC Sheet Stretching Unit Paid
We are looking for stretching unit to make PVC sheet uniform
0.04 to 0.90, and the size of our calender machine is 22x66
inch. Please offer us the complete machinery for the finish
product.
Country: Pakistan
Buy Offer >
Machine >
June 9 2006
Extruder For Flame Retardant Master Batch
Paid
We are looking out for an extruder for manufacturing flame
retardant master batches. We will appreciate if you can let us
have full details of your product alongwith the prices and other
terms & conditions. Kindly send us your full details through
courier to our address.
Country: India
Buy Offer >
Additive Filler Chemical >
June 9 2006
1000mt Stabilizer (PVC) (lead And Tint)
Paid
We are interested stabilizer (PVC) use for: water pipe, electric
wire, ceiling board, raincoat and simili. We would be glad to
receive specifications, delivery times, your terms of payments,
and details of discounts for regular purchases and large
Country: Viet Nam
Buy Offer >
Machine >
June 12 2006
PPMFT Yarn Machinery Paid
We are intersted in purchase of Poly Propelene Multi Filament
Texterized Yarn ( PPMFT ) making machinery including TFO with
capacity of 45 Tonnes Per month. Please provide specification
with the best prices
Country: India
Buy Offer >
Packaging Materials >
June 12 2006
Collapsible Water Containers Paid
We want to buy disposible collapsible water containers of 0.5 ,
1 and 5 gallons. They have to be like cubitainers made of
flexible Polyethylene to be filled with beverage, water and
cooking oil.
Country: Nicaragua
Sell Offer >
Raw Material >
June 12 2006
Raw Cotton Yarn
Kayavlon Impex (Global
Textile Solution)
We are glad to inform you that we are one of the leading
international indenter in India. We are mainly dealing with
textile & plastic raw materials. We can supply you the following
items on regular basis. Raw cotton from Indian origin with below
specifications: Indian raw cotton details: Variety hvi span
length micronaire Bunny 30 mm 3.0 to 3.5 Mcu-5 29 mm 3.0 to 3.6
Shankar-6 28.5 mm 3.5 to 4.4 Mcu-5 28.5 mm 3.0 to 3.5 Shankar-6
27 mm 3.5 to 4.4 H-4 super 27 mm 3.0 to 3.5 H-4 super 26 mm 3.0
to 3.5 H-4 super 25.4 mm 3.0 to 3.5 Y-1 24 mm 3.5 to 4.4.
City: Surat State: Gujarat Country: India
Send Mail
Sell Offer >
Plastic Rubber Products >
June 12 2006
Custom Plastic Molded Items
Venu Polymer India Pvt
Limited
We can supply any quantity of plastic molded items as per your
design.
City: Noida State: Uttarpardesh Country:
India
Send Mail
Buy Offer >
Machine >
June 12 2006
Inkjet Printing Machine Paid
We require an inket printer for our water bottles to mark expiry
date etc. We want printer for conveyor line to print date of
manufacturing etc for plant.
Country: Mozambique
Sell Offer >
Raw Material >
Plastic Rubber Products >
June 12 2006
PVC Resin Compound UPVC Pipes
QRP
We supply PVC resin, PVC compound, PVC granules soft and hard
and uPVC pipes. We are a marketing agent of a factory based in
isfahan of iran which is one of the leading producers of PVC
products according to international standards. The products are
exported worldwide presently. We would like to expand our market
and would like to have firm cooperation with different end users
and trading companies which work in the relevant field.
City: Tehran State: Tehran Country: Iran
Send Mail
Sell Offer >
Machine >
June 12 2006
Monolayer Blown Film Line
Rajoo Engineers Limited
We offer Monolayer blown film to produce films suitable for
carry bag with HDPE & HM. Available for sale monolayer blown
film line to manufacture blown gusseted lay flat film of 315 to
550mm width. Rated output of 40kg/hr with lowest power
consumption.
City: Rajkot State: Gujarat Country: India
Send Mail
Sell Offer >
Raw Material >
June 12 2006
Polyester Nylon Yarn Nylon Chips
Kayavlon Impex (Global
Textile Solution)
We are glad to inform you that we are one of the leading
international indenter in India. We are mainly dealing with
textile & plastic raw materials. We can supply you the following
items on regular basis. 1. Nylon chips - semi dull/bright. 2.
Nylon poy - from 20d to 600d ( SD/brt/coloured) 3. Nylon dty -
from 20d to 600d ( SD/brt/coloured) 4. Nylon fdy - from 20d to
600d ( SD/brt/coloured) 5. Amorphus chips If you are intrested
in any of above items, please feel free to contact us.
City: Surat State: Gujarat Country: India
Send Mail
Sell Offer >
Raw Material >
June 12 2006
Polyester Yarn Polyester Chips
Kayavlon Impex (Global
Textile Solution)
We are glad to inform you that we are one of the leading
international indenter in India. We are mainly dealing with
textile & plastic raw materials. We can supply you the following
items on regular basis. 1. Polyester chips - semi
dull/bright/super bright. 2. Polyester poy - from 50d to 600d (
SD/brt/coloured) 3. Polyester dty - from 30d to 600d (
SD/brt/coloured) 4. Polyester fdy - from 30d to 600d (
SD/brt/coloured) 5. Polyester psf - from 1.2d to 15d/38mm,51mm
(sd/brt/coloured)
City: Surat State: Gujarat Country: India
Send Mail
Sell Offer >
Raw Material >
June 12 2006
PVC Resin
Kayavlon Impex (Global
Textile Solution)
We are glad to inform you that we are one of the leading
international indenter in India. We are mainly dealing with
textile & plastic raw materials. We can supply you the following
items on regular basis. 1. Pet resins - bottle grade/film
grade/fiber grade. 2. PVC resins - pipe grade/cable grade/film
grade. 3. Engineering plastic - pbt/pa6/pa66/ABS. 4. Amorphus
chips.
City: Surat State: Gujarat Country: India
Send Mail
Buy Offer >
Raw Material >
June 12 2006
HDPE Resin Paid
We want buy HDPE raw materials one container every month. We
have very small market. So we can buy one container 20'.
Country: Maldives
Sell Offer >
Machine >
June 12 2006
PP Spun Bonded Non-Woven Machine
WV Group Co.,Ltd
We offer PP Spun Bonded Non-Woven Machine. The salient features
of our machine is as follows Low cost of Production
Competitive machinery cost Fully back up service Machinery
down time less than 24 hours Complete back up service support
Energy saving controls used Process rejection less than 0.5%
on a average production level
City: Guangzhou State: Guangdong Country:
China
Send Mail
Buy Offer >
Scrap Waste >
June 12 2006
Waste Clean Plain BOPP Film Paid
We want to buy waste BOPP film which should be clean plain BOPP
film, no printing, no glue-water. It is best if roll pack.
Country: China
Buy Offer >
Plastic Rubber Products >
June 12 2006
Disposable Cups Paid
We would like to import all kinds of disposable cup. Cups
material: PP, PS, Foam, Paper etc
Country: Israel
Sell Offer >
Moulds Dies >
June 12 2006
Plastic Fiberglass Mould
Huangyan Ningguang Mould
Co., Ltd
We mainly manufacture automobile, home appliance,household
goods, and all kinds of bicycle plastic injection mould. The
product of mold covers with big, middle and minitype injection
mould,BMC/SMC Fiberglass mold and all kinds of blowing mold.
Enterprise strictly according to ISO9001 to manage
City: Taizhou State: Zhejiang Country:
China
Send Mail
Buy Offer >
Machine >
June 12 2006
Nylon Cable Tie Technology Paid
We are interested to source the technology and machines and
moulds to manufacture Nylon cable ties. We need consultants, who
can guide us in selecting the right tech and machines.
Country: India
Sell Offer >
Machine >
June 12 2006
Plastic Windows Machinery
Ozgenc Machinery
We offer high-quality machines with sensible prices for PVC
windows manufacturing.
City: Bursa State: Bursa Country: Turkey
Send Mail
Buy Offer >
Machine >
June 12 2006
Plastic Recycling Machine Paid
We need to buy plastic recling machine from China or Taiwan or
Korea. Our requirment is to recycle ABS, PS, PP and capacity
300kg /hours.
Country: Egypt
Sell Offer >
Plastic Rubber Products >
June 12 2006
PVC Profile
Shanghai Gibo Group
We offer PVC profiles. Features: specifications: 60 casement, 60
sliding, 80 sliding, 88 sliding, 95 sliding. Excellent quality
in China. 1)Specifications: 60 casement, 60 sliding, 80 sliding,
88 sliding, 95 sliding 2)Colors: Brown, gray, yellow, green
3)Good quality, with excellent performance 4)Light surface,
reasonable construction, strict quality control 5)ASA/PVC
colorful coextrusion profiles with high weatherproof and
Anti-discoloration performance, self-cleaning characteristics,
Not easy to collapse
City: Shanghai State: Shanghai Country:
China
Send Mail
Buy Offer >
Packaging Materials >
Machine >
June 12 2006
Stretch Film Rewinding Machine
Paid
We want to buy big industrial type stretch films and their
rewinding machine. We need strech film roll lenght of 1500
m,3000m or 6000m , thickness of film 7-20micron and width of
roll must be 50 cm or 80 cm We are rewinding big stretch film
rolls to small houseshold strech films we want it for industrial
pallet wrap and for food wrap also we are looking for strech
film rewinding machine we are rewinding big strech film rolls to
small houseshold strech films
Country: Turkey
Buy Offer >
Packaging Materials >
June 12 2006
PVC Stretch Film Paid
We want PVC stretch film food grade. We want only PVC cling film
(stretch film). It must be food grade,8 micron(or max 9mic)
thick,30cm or 45cm width,3000 meter-4000 meter in lenght,without
any smell.It should be light yellow color but we will consider
others as well.
Country: Turkey
Buy Offer >
Machine >
June 12 2006
PVC Welding Machine Paid
We require a PVC welding machine to seal the PVC COATED FABRICS
(FLEX /BANNER MATERIAL). The approximate weight of fabric is
600gram/sqm. We will prefer sealing blade/knife size of 6 mm x
one meter. Please provide us the technical details and prices of
your machines.
Country: Pakistan
Buy Offer >
Machine >
June 14 2006
Cheese Winder For Monofilaments
Paid
We are Polyester monofilament manufacturer we are intrested in
buying cheese winders. We want cheese winder for monofilament
and tape suitable for rope making as well as yarn production
Country: India
Buy Offer >
Scrap Waste >
June 14 2006
Baby Diaper Leg Trims Scrap Paid
We are looking for baby diaper leg trims(white color). These
will be recycled and used as plastic raw material(PE,PP). We
look for production scrap. Normally PE or PP material of the
diaper is rectangle shaped. The scrap parts which are cut are
called leg trims. The diaper is then packed and delivered to
customers.but these scrap parts are leftover in the factory.and
diaper factories collect these leftovers (leg trims) and sell to
recycling companies or dealers.these leg trims are recycled and
used as raw material (granule) PE or PP(Polypropylen or
Polyethylene)
Country: Turkey
Buy Offer >
Machine >
June 14 2006
Single Head PVC Welding Machine
Paid
We request a quotation to purchase one Single Head PVC Welding
Machine. Extrusion dimensions for welding capacity,
approximately 120mm x 70mm in shape of an hollow section angle
Country: New Zealand
Buy Offer >
Raw Material >
June 14 2006
PP Raw Material Paid
We are interst to buy a big quantity of PP virgin raw matiar
100% pure material. We need up to 10000 metric ton per year. So
please give us your final price
Country: Egypt
Sell Offer >
Plastic Rubber Products >
June 14 2006
Polyimide Film Tapes
Creative Global
Services Inc
We specalized in the Polyimide film and tape business. Our ul
approved 1mil, 2mil, 5mil Polyimide film and tapes are widely
used in different application, such as tape manufacture, power
coating masking, transformer and motor insulation, identify
industry, circuit board, manufacture, wire and cable, sealing
parts produce, and so on.
City: Wuxi State: Jiangsu Country: China
Send Mail
Sell Offer >
Machine >
Moulds Dies >
June 14 2006
PP Fitting Mould
Huida Plastic Mould
Co., Ltd.
We are the leading manufacturer of PP, PVC, PE pipe fitting
mould in China. at the same time, we offer the suitable
injection machine. We can design the product and mould for you.
City: Shenyang State: Liaoning Country:
China
Send Mail
Sell Offer >
Used Machine >
June 14 2006
Used PET 20 Lt Stretch Blow Molding Machine
Emmanual Enterprises
We want to Sale used 20 lt PET Stretch Blow molding machine(6
months old Chinese make) Full running unit with mold,
compressor, Intrared Heater and all the other attachements.
City: Bangalore State: Karnataka Country:
India
Send Mail
Sell Offer >
Moulds Dies >
June 14 2006
Plastic Injection Mold
E Tai Precision
Industry Limited Company
We are specialized in designing ,producing and exploitation and
development for all kinds of medium to large size plastic
injection mould products, likes bumper, dash board, truck
bumper, truck lamp rim, fender and etc. We have a range of
latest microprocessor controlled injection moulding machines
from 500 tonnes to 4000 tonnes. And we are leading in the design
of tooling and moulding of plastic components for a wide range
of industries
City: Douliu City State: Yun Lin Hsien Country:
Taiwan
Send Mail
Buy Offer >
Machine >
June 14 2006
Plastic Brooms Manufacturing Machinery
Himar Fabrics & Pkg Pvt
Ltd
We require complete machinery to manufacture Plastic Brooms. We
also require the know how to manufacture the same. This project
is required for Export
City: Mumbai State: Maharashtra Country:
India
Send Mail
Sell Offer >
Scrap Waste >
June 14 2006
PET X-Ray Film From Medical Use
Ivo Besselsen Trade
We offer PET X-Ray Film from medical use. Material is grinded
washed and dry. Price USD 300,-C&F. Quantity:50MT direct
available. Pictures are available on request. Please do not
hestitate to contact for more information
City: Putten State: Gelderland Country:
Netherlands
Send Mail
Buy Offer >
Used Machine >
June 14 2006
Used Automa Extrusion Machine With 10 Liters Mould
Paid
We want to buy used machine of Automa Spa, Italy, production
suitable to produce 10 liters plastic cans. Required model-Plus
AT 10 MS or similar. Specification:- Automatic extrusion
blowmolding machine, single station, 4 parison, to produce
plastic HDPE 10liters cans 100-120 pcs/hour with single parison.
Country: Ukraine
Sell Offer >
Machine >
June 14 2006
PVC Windows And Doors, Welding Machines
Murat Machine Co.
We are the biggest producer and exporter of the machines for
processing PVC profiles in Turkey. We export our products all
over the world so we have referance to give in all countries of
the world. Our products profile is as bellow: -Fully Automatic
Machining Center -Welding Machines -CNC Corner Cleaning Machines
-Saws -End Milling Machines -Drain Slot Routers -Routers
-Aluminum Corner Crimping Machines -Conveyor Systems -Sash
Assembling Machines -Cooling Units and Hydropnomatic sawblade
feed devices
City: Bayrampasa State: Istanbul Country:
Turkey
Send Mail
Buy Offer >
Machine >
June 14 2006
Grocery Bags Making Machines Paid
We request for a quotation of complete grocery plastic bag
making production plant. 1) H/L/LL-DPE Extruding Machine Film
width: 150-700mm Film thickness: 0.008-0.2mm Film output: 60
kg/hr 2) 4 Colours Flexographic Printing Machine Print width:
500mm Print length: 200-1200mm Print speed: 60 m/min 3) Sealing
& Cutting Machine For: T-Shirt bag, Banana handle bag & Flat bag
Cutting width: 14" x 2 lines Cutting length: 30" - 40" Cutting
speed: 40-120 pc/min Sealing & Cutting thickness: 0.01-0.15mm 4)
H/L/LL-DPE Recycling Machinery
Country: United Kingdom
Sell Offer >
Machine >
June 14 2006
Plastic Machinery
Ningbo Jinde Group
Co.,Ltd
Our company offer Injection molding machine, Extrusion line,
Blow molding machine, and auto-loader, hopper dryer, and other
assistant machine for Plastic machinery.
City: Ningbo State: Zhejiang Country: China
Send Mail
Buy Offer >
Plastic Rubber Products >
June 14 2006
Plastic Rattan / Synthetic Rattan
Paid
We need plastic rattan or synthetic rattan for produce furniture
and wicker basket.
Country: Thailand
Sell Offer >
Reprocessed Material >
June 14 2006
LDPE/HDPE Reprocessed Granules
Zibo Guanglong Plastics
We are a manufacturer of reprocessed LDPE/HDPE gruanule based in
China. We can supply with a very competitive price. 1.HDPE
extrusion,pipe grade, black,$760/mt(FOB Qingdao,China.) 2.HD/LD
injection grade,black,$670/mt 3.HDPE blowing,natural, $900/mt
4.HDPE blowing,natural white, $1030/mt 5.LDPE blowing,clear,
$1000/mt 6.LDPE cable line, black,$820/mt 7.Anti-foam Agent,
$680/mt (suitable for making films,packing bags,sheets and
injection,extrusion products.It can absorb the moisture in
master-batch greatly and can lower the cost)
City: Zibo State: Shandong Country: China
Send Mail
Sell Offer >
Scrap Waste >
June 14 2006
PC/ABS Off Spec Regrind PBT Block Off Spec
C H Plastic
We offer 40MT PC/ABS FR off spec at USD2000/MT CNF Hong Kong and
40MT PC/ABS FR regrind USD1800 CNF Hong Kong. Colour renge light
grey, natural and black. Also have PC/ABS non FR. We can supply
50MT PBT block,natural at USD900/MT CNF Hong Kong and 100MT PBT
off spec resin, natural at USD1500 CNF Hong Kong. All from
petrochemical plant.
City: Petaling Jaya State: Selangor Country:
Malaysia
Send Mail
Sell Offer >
Moulds Dies >
June 16 2006
Blow, Preform Injection Moulds
Aggelopoulos Bros Co
We Design & Manufacture Blow Moulds for PET, PP and PE
containers, Injection Moulds for caps and also Moulds for PET
Preforms. We manufactures more than 30 years superb Blow and
Injection moulds for plastics. It is specialised in designing
and manufacturing (D&M) moulds for PE, PP containers from 50 ML
up to 30 LTR and for PET containers up to 10 LTR. Also
specialised in D&M preform moulds for various neck dimensions
and weights. In addition our company is manufacturing high
productive injection moulds for caps of any container up to 12
cavities.
City: Likovrisi State: Attiki Country:
Greece
Send Mail
Sell Offer >
Packaging Materials >
June 17 2006
Thermoformed Trays Containners
Newage Packaging
We manufacturer Blisters, Thermoformed Trays, Display Trays in
PVC, PET, HIPS and PP. We also manufacturer PP Sheets. We are
one of the leading thermoforming companies in India serving most
of the MNC's in India and abroad. We do lot of export activities
to European nations in respect of meat Trays, Food and Vegetable
trays, cosmetic dispensers and electronic handling trays etc. We
are in a big way in respect of toiletries, personal care and
Electronics packaging.
City: Mumbai State: Maharashtra Country:
India
Send Mail
Buy Offer >
Raw Material >
Additive Filler Chemical >
June 17 2006
Virgin Material Masterbatch Black
Paid
We are amanufacturer of plastic carrier bags and also
adistributor of PP, LLDPE,HDPE and Masterbatch virgin materials.
We want 40'footer Container - CIF - Accra, Ghana. for LLDPE,
HDPE, PP virgin andMasterbatch materials.
Country: Ghana
Buy Offer >
Plastic Rubber Products >
June 17 2006
Cast And Extruded Acrylic Sheets
Paid
We are importer of cast and extruded acrylic sheets. Please
quote best prices for sheet.
Country: United States
Sell Offer >
Machine >
June 17 2006
Woodfree Pencil Production Lines
Extrusion Technik
We provide complete project for manufacturing woodfree pencils
along with the technology, pencil manufacturing machinery,
automatic post production machinery such as ferrule / eraser
fixing,sharpening,end - cutting,rounding, etc.
City: Ahmedabad State: Gujarat Country:
India
Send Mail
Buy Offer >
Machine >
June 17 2006
Machinery for Manufacturing PVC Pipes
Paid
We are looking for Machinery for Manufacturing PVC Pipes (Twin
Screw)- Made in Germany or India only. Pls. send us your
quotation for New Machinery and Used Machinery with good
condition. All quotation shoule be with full detail about
machinery i.e. cateloge
Country: Saudi Arabia
Sell Offer >
Plastic Rubber Products >
June 17 2006
Manual Water Pumps For 5 Gallon PC Bottles
Akplast Co
We are manufacturer of manual plastic water pumps and also
plastic injection moulded parts made to order. We also
manufactures plastic parts made to order. We have five injection
molding machines with 190 to 240 tons capacities. In our tooling
shop equipped with CNC vertical machining center, sinker EDM and
the conventional machines, we design and manufacture moulds
based on our customers drawings. If you are interested in our
pumps or look for a reliable manufacturer of custom built
plastic parts
City: Izmir Country: Turkey
Send Mail
Sell Offer >
Packaging Materials >
June 17 2006
Plastic Bags Garbage Bags PE Bags
Europackaging
We can supply all kinds of plastic bags such as t shirt bags,
shopping bags, garbage bags, trash bin liners, PP woven sacks,
PP woven fabric, PE bags. Offers will be sent on receipt of
exact dimensions, packing style and quantity.
City: Mumbai State: Maharashtra Country:
India
Send Mail
Buy Offer >
Used Machine >
June 17 2006
Used Household Brush Machine Paid
We are looking for used household brush making machine for
plastec and wood base.
Country: Syrian Arab Republic
Sell Offer >
Plastic Rubber Products >
June 17 2006
PEVA, PE, EVA, PP Sheet
Rich-Big Enterprise
Co., Ltd.
Our company produces PE, EVA, PP and PEVA sheets material for
application of many relevant consumer products such as umbrella,
rain coats, shower curtains, table clothes, shopping bag and
many items according to our customers design.
City: Tainan State: Tainan Country: Taiwan
Send Mail
Sell Offer >
Used Machine >
June 17 2006
Used LDPE Film Extrusion Machine
Maruti Plastic
We are interested to sale two used LDPE Film Extrusion Machine.
Both in good working condition
City: Solapur State: Maharashtra Country:
India
Send Mail
Sell Offer >
Packaging Materials >
June 17 2006
BOPP/PVC Film
Qinxinda Industry Co.,
Ltd
We offer Various packaging, BOPP/PVC Film, PVC handbag, Gift
box/bag, Cosmetic box/bag, PVC box/bag. We are the professional
various packaging manufacturer from China. We have good credit
standing, can provide good quality and competitive price. Look
forward to cooperate with you in future.
City: Shenzhen State: Guangdong Country:
China
Send Mail
Sell Offer >
Moulds Dies >
June 17 2006
PVC Foaming Plastic Injection Shoe Moulds
Full Jia Enterprise
Co., Ltd.
We offer PVC or Foaming Plastic Injection Shoe Moulds. Slippers,
Sandals, Casual Shoes, Rainboots, etc. The Moulds for Plastic
Injection Rotary Machines. Our Moulds can match any Taiwan's
Plastic Injection Rotary Machines and we already engaged in this
business over 25 years. Our quality and price you can rest
assured we are the best. We are looking for new customers and
agent so if you are interested in our products, please feel free
to contact us. We hope we can establish cooperation with you
soon.
City: Holi Hsiang, State: Taichung Hsien
Country: Taiwan
Send Mail
Sell Offer >
Plastic Rubber Products >
June 17 2006
Outdoor Garden Plastic Mailbox
Canshow Industrial Co
Ltd
We offer outdoor garden plastic mailbox. Colors: 6 colors more
for option antique color finishing, fake wood finishing, special
color finishing requested availably. Size: 30.5 x 41.5 x 18 cm,
packing: 1pc/individual box, 4pcs/ctn/4.0', Shipment: Taiwan
City: Taichung State: Taiwan Country:
Taiwan
Send Mail
Sell Offer >
Plastic Rubber Products >
June 17 2006
PP Rope HDPE Ropes
Global Rope Exports
We have 25 years of experience in the field of ropes now we are
exporting PP rope and HDPE rope sizes 3mm-24mm in bulk orders.
Polypropylene ropes made from fibrillated flat tapes have
already replaced cotton, jute, sisal fibre and manila fibre
ropes all over the world. There is a tremendous demand for
Polypropylene ropes from the shipping and marine industry,
defense, navy, electricity boards, port-trusts and dock yards.
City: Bangalore State: Karnataka Country:
India
Send Mail
Sell Offer >
Machine >
June 17 2006
Injection Blow Mould
Woosung-Tech Co.
We are a leading manufacturer And exporting Injection Blow
Moulds to worldwide with good reputations; - Injection Blow
moulds For Uniloy, Jomar machine - Injection Stretch Blow moulds
For Nessei, Aoki, Sidel machine Please contact us with product
drawing for quote. We will quote with competetable price within
2 days once we get the drawing.
City: Bucheon City, State: Gyeonggi-Do Country:
South Korea (Republic Of Korea)
Send Mail
Buy Offer >
Machine >
June 17 2006
PVC Flex Making Whole Plant Paid
We wish to import the PVC flex making whole plant (use for
making banners etc for advertising industry) on turn-key basis.
Product width is 126 inches.
Country: Pakistan
Sell Offer >
Plastic Rubber Products >
June 17 2006 | | |
